English 
Deutsch 
Patent pending: The insertion system by S:FLEX
The advantages of the S:FLEX insertion system at a glance:
- Can be installed as a PV facade system or used on noise barrier walls and solid balustrades on balconies
- Components for a special look also available in black
- Suitable for module frame heights of 25 to 45 mm - using just one type of insertion rail
- Thanks to the hollow chamber profile, the rail has a very high static load-bearing capacity for a larger span with fewer roof connection points
- With newly developed module clamps that combine the advantages of floating installation and firm clamping: no rattling of the modules and no thermally induced glass breakage or micro-cracks
- Aluminum spacers integrated in the module clamps make the installation and maintenance of additional rubbers et al. redundant
- Simple grounding
- Service-optimized: Modules can be loosened and removed with just a 5 mm Allen key thanks to maintenance gaps
Components
ELS Fix Clamp
Allows for thermal linear expansion despite the PV modules being firmly clamped. Clamping upwards ensures a flat module surface even with module frames that are less high. Spacers are structurally integrated.
ELS Insertion Rail
Mounting rails that are suitable for all module frame heights and particularly stable statically, as they are designed as a hollow chamber profile.
ELS Cross Adaptor
Ensures structurally identical properties in the area of the rails and the connections.
ELS Side Cladding
Continuous side panel for an all-round closed module field.
ELS Eaves Cladding
End panel for a high-quality look. Components and rails underneath remain hidden.
Data
| Application |
| Facades, noise protection walls and massive balustrades or pitched roofs with roof tiles, sheet metal roofs |
| Fastening |
| Facade: on-site Pitched roof: compatible with all S:FLEX fastening solutions for tiled roofs and metal sheet roofing |
| Module type |
| Framed modules |
| Module size |
| All common sizes |
| Module orientation |
| Vertical/horizontal |
| Wind load |
| Up to 2.4 kN/m² |
| Snow load |
| Up to 5.4 kN/m² |
Downloads
A data sheet with more information on our S:FLEX Insertion System for facades and tilted roofs:
S:FLEX Insertion System
For assembly instructions, please click here:
S:FLEX Insertion System assembly instructions
Planning
If you would like to take advantage of our planning support, you can:
– fill out our online form
– send an e-mail to
– or call us: +49 (0)761 888 56 08 0
The solution for the optically and technically demanding
With the S:FLEX insertion system, PV systems can be implemented with module surfaces that fit harmoniously and coherently into the look of the building, despite the low installation and maintenance costs and without sacrificing functionality. This is ensured, among other things, by the innovative module clamp and the one-for-all insertion rail. The insertion rail of the S:FLEX modular system, for which a patent has been applied, is not only structurally particularly stable, but also simplifies storage thanks to its universal usability.
