English 
Deutsch 
Installation with the S:FLEX standing seam clamp directly onto the roof – without penetration
The advantages of the S:FLEX standing seam clamp at a glance:
- Direct attachment of the modules to the standing seam with the S:FLEX standing seam clamp and clickable module clamps
- Installation via cross-adapter connection also possible
- No additional load on the roof membrane due to thermal expansion with direct mounting
- No roof penetration –- no leaks
- Wide clamp design ensures the load is distributed across the surface of the seam
- Low logistics costs due to fewer components and compact designs with no long articles
- Made of weather-resistant aluminium and stainless steel
- We will gladly create the structural design for our customer's projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components
Components
Standing seam clamp 2.1
Direct attachment of the modules without damaging the roof membrane.
End and mid clamps
S:FLEX module clamps have an extremely wide clamping area and are therefore suitable for all standard modules and frame heights of 30-50mm. High torsion resistance and our latest, ultra-smooth one-click technology make installation a snap.
Data
| Application |
| Standing seam metal roofs |
| Fastening |
| Non-penetrative – with standing seam clamps attached directly to the sheet metal roofing |
| Module type |
| Framed modules |
| Module orientation |
| Horizontal/vertical (with clamping on the short side) |
| Rail layers |
| Single-layer |
| Wind load |
| Up to 2.4 kN/m² |
| Snow load |
| Up to 2.4 kN/m² |
| Advantages |
| No rails required / low material, storage and assembly costs / fast installation / no roof penetration |
Downloads
You can download a data sheet with detailed technical specifications of our standing seam clamp here:
S:FLEX standing seam clamp
The assembly instructions are available here:
S:FLEX assembly instructions for standing seam clamps 2.1/DCO/CL
Planning
Information about our Planning Tool is available HERE.
If you would like to take advantage of our planning support, you can:
– use our planning aid
– fill out our online form
– send an e-mail to
– or call us: +49 (0)761 888 56 08 0
Framed modules can be quickly, safely and cost-effectively installed directly on the roof membrane with our standing seam clamp – with our proven one-click technology, without roof penetration and with minimal transport costs and storage space requirements.
The S:FLEX standing seam clamps DCO/CL for metal profiles such as Domitec/GBS/Klip-Lok®
The advantages of the S:FLEX standing seam clamps DCO and CL at a glance:
- Direct attachment of the modules to the sheet metal profile with the standing seam clamp and clickable module clamps
- Suitable for metal industrial system roofs (such as Domitec, Klip-Lok® or similar)
- Installation via cross-adapter connection also possible
- No additional load on the roof membrane due to thermal expansion with direct mounting
- No roof penetration –- no leaks
- Wide clamp design ensures the load is distributed across the surface of the sheet metal profile
- Low logistics costs due to fewer components and compact designs with no long articles
- Made of weather-resistant aluminium and stainless steel
- We will gladly create the structural design for our customer's projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components
Components
Standing seam clamp DCO
Direct attachment of the modules without damaging the roof membrane for clamping widths of 7–25 mm.
Standing seam clamp CL
Direct attachment of the modules without damaging the roof membrane for clamping widths of 20–33 mm.
End and mid clamps
S:FLEX module clamps have an extremely wide clamping area and are therefore suitable for all standard modules and frame heights of 30-50mm. High torsion resistance and our latest, ultra-smooth one-click technology make installation a snap.
Data
| Application |
| Standing seam clamp DCO: For metal industrial system roofs such as Saflok700, Klip-Lok 406, Ribroof 465, Domitec, GBS or identical systems Standing seam clamp CL: For metal industrial system roofs such as Klip-Lok 700, Saflok410, Domitec or identical systems |
| Fastening |
| Non-penetrative – with standing seam clamps attached directly to the sheet metal roofing |
| Module type |
| Framed modules |
| Module orientation |
| Horizontal/vertical (if approved by module manufacturer) |
| Rail layers |
| Single-layer |
| Wind load |
| Up to 2.4 kN/m² |
| Snow load |
| Up to 2.4 kN/m² |
| Advantages |
| No rails required / low material, storage and assembly costs / fast installation / no roof penetration |
Downloads
You can download the assembly instructions here:
S:FLEX assembly instructions for standing seam clamps 2.1/DCO/CL
Planning
Information about our Planning Tool is available HERE.
If you would like to take advantage of our planning support, you can:
– use our planning aid
– fill out our online form
– send an e-mail to
– or call us: +49 (0)761 888 56 08 0
With both the DCO and the CL model, framed modules can be easily installed without roof penetration – and very quickly thanks to our one-click technology. Safe, easy and cost-efficient.
On roofing that does not permit direct module installation, standing seam clamps can also be used in combination with S:FLEX rails and cross adapters.
